Browse Items (1668 total)
Sort by:
Mons Mill - MOT00209
Mrs Eastwood, working on a ring spinning frame, Mons Mill, 1949.
Mons Mill - MOT00208
Mrs Whitham on a bobbin winding frame, 1949.
Mons Mill - MOT00207
Mrs Parfitt watching a beaming frame, 1949.
Mons Mill - MOT00206
Miss Heyworth pushing down sliver into a card can, Mons mill, 1949.
Mons Mill - MOT00205
Mrs Payne, right, at her drawing frame with Mr Melton, the Head Carder, Mons Mill, 1949.
Mons Mill - MOT00204
View inside the card room at Mons Mill, 1936.
Mons Mill - MOT00203
The boiler room was located below the engine house
Mons Mill - MOT00202
View of the magnificent tiled engine house at Mons Mill, in 1936.
Mons Mill, Todmorden - MOT00201
View of the magnificent tiled engine house at Mons Mill, in 1936.
Mons Mill, Todmorden - MOT00200
Rear view of Mons Mill in 1936 showing the office building, now occupied by the Ukrainian Club. It is said that Mons Mill was built to only half of its intended size. The only clue to this grand plan is in the south gable, shown here, which was left…
Mons Mill, Todmorden - MOT00199
Until 1914 the mill was known as Hare Mill, recognisable by the huge white letters faced into the chimney in glazed brick.
Mons Mill under Construction, 1908 - 9 - MOT00198
Its founder, Jonathan Gledhill, supervised the cutting of the first sod in June 1907.
Mons Mill under Construction, 1908 - 9 - MOT00197
The mill's founder, Jonathan Gledhill, supervised the cutting of the first sod in June 1907.
Joshua Smith's - MOT00191
Joshua Smith's winding room - A view of the winding room at Joshua Smith's Frostholme Mill, in Cornholme, 1913. The firm of Joshua Smith's ran the mill from 1882 until well into the 1950s, at one time employing over 700 people in the production of…
Joshua Smith's - MOT00188
View across the main weaving shed at Joshua Smith's, 1912.
Frostholme Mill, Cornholme. - MOT00187
The 2nd motion and DC generator
Frostholme Mill, Cornholme. - MOT00186
The horizontal cross compound steam engine, installed in 1896, was capable of driving up to 900 bhp and powered the whole of the factory by a rope pulley system.
Frostholme Mill, Cornholme. - MOT00185
Carson Whiteside, Chief Engineer. In 1959 the steam engine became redundant and in 1960 it was dismantled by a small gang headed by Corson Whiteside, the chief engineer. The flywheel was 20 ft in diameter and each spoke weighed over 19 cwt.
Frostholme Mill, Cornholme. - MOT00183
Built in 1860, the mill was enlarged and developed under the ownership of Joshua Smith Ltd who ran it from 1882 until well into the 1950s. At one time they employed over 700 people in Cornholme, primarily in the weaving industry.
After Joshua…
After Joshua…
Waterside - MOT00181
A view across the 'New' shed at Waterside in 1912. Interior of the large weaving shed at Waterside in 1912. It is now the site of the Morrisons Supermarket.
Waterside Mill - MOT00180
During the hey-day of the weaving activities the sheds were powered by a pair of steam engines of 1,000 hp, which were named 'Sam' and 'John' after the two eldest surviving Fielden sons. The photograph shows Leslie Baron who was in charge of the…
Waterside c1866 - MOT00179
The three cottages in the centre of the picture were the homes and workplaces of the entrepreneurial Fielden family who moved there from Edge End in 1782. The various stages of expansion can be seen in the five-storey building which was a spinning…
Albion Mill - MOT00178
The beam engine which once powered Albion Mill, Halifax Road, formerly owned by John Dawson & Sons Ltd.
Albion Mill - MOT00177
The Lancashire boiler at Albion Mill, showing the coal hoppers.
Stoneswood Mill, Bacup Road, 1993. - MOT00176
Midgelden Clough flowing down the Bacup valley provided a ready source of water for the early cotton mills. Stoneswood Mill once formed one of the outside factories of Fielden Bros. but was given up more than a century ago, the spinning machinery…